2X Dillon Powder Measure Hopper Size Upgrade from UniqueTek USA

2 x Dillon Powder Measure Hopper Size Upgrade from UniqueTek USA

2 x means Double Size not 2 items !

For the Dillon Auto Powder Measure

If you reload large capacity rifle cartridges, large quantities of pistol cartridges for competition, or use "fluffy" high load density powders like IMR Trail Boss, you know how frustrating it is to have to stop frequently to fill the powder hopper on your Dillon press.

Ever wish you could "Super Size" your powder hopper?

Now you can!

The 2X Powder Hopper Tube doubles the powder capacity of your Dillon Auto Powder Measure by replacing the original 7" powder hopper tube with a 14" powder hopper tube.

Fits both the Dillon Auto Powder Measure* and Dillon "Belted Magnum" Powder System!
The 2X Powder Hopper Tube™ is made from high-strength, clear, polycarbonate tubing that will not stain or discolour from extended contact with most gunpowder’s.†

Our  baffle is included and provides a uniform flow of gunpowder to the powder bar, regardless of the powder level in the hopper. The powder baffle is made from 20 gauge aluminium and is water-jet cut to precise dimensions.

Easy Installation!
Just empty the powder measure, remove the two screws attaching the original powder hopper and lift off the powder hopper tube. Insert the 2X Powder Hopper Tube™ and attach using the original screws. You even get to use your original Dillon powder measure lid.

Compatibility with Dillon Low Powder Sensor
If you use a Dillon Low Powder Sensor, it will still fit but will alarm at 50% full unless you modify it with a longer follower rod.

Extending the follower rod is easy and inexpensive and instructions are included.

Super 1050 Users
Due to the location of the case feed hopper on the Super 1050, there isn't enough vertical clearance for a 14" Powder Hopper Tube. We have an alternative 11" tall Powder Hopper Tube that does fit and yields a 57% increase in powder capacity. Just select the Super 1050 version from the drop-down menu when you place your order.

Make sure the height will fit on your bench.

Notes:
* Fits all versions of the Dillon Auto Powder Measure that have two screws attaching the Powder Hopper Tube to the powder measure body. Older Dillon powder measures with the powder hopper tube held in place by epoxy, and not by 2 screws, require alteration for the 2X Powder Hopper Tube to be installed. Such alterations may void the Dillon warranty for your powder measure and is therefore not recommended.
† Staining can occur with Hodgdon TITEGROUP™ gunpowder. When using TITEGROUP™, we recommend that you drain the powder measure when not in use.