• UniqueTek Port-A-Stand 'H' - Portable Collapsible Standard 18" / 45cm UK Target Stand base


    This item is out of stock

    The Port-A-Stand™ 'H' sets up in just seconds! Just rotate the legs into position, place on ground, and insert the target frame. There are no parts to assemble* … or lose. When done shooting, it quickly folds for easy transport and storage. You can even hang it on the wall using one of the stake holes!
    * Shipped disassembled. Assembly required only before first use.

    Port-A-Stand™ 'H' accepts 1"x 2" furring strips and can be used with any 18" width targets including USPSA, IPSC, IDPA and NRA D-1 targets. You can also use any plain cardboard as a backing and then tape any type or size paper target to the face.

     'H' Shape with 24" Feet for Maximum Stability & Wind Resistance
     Four Tent Stake Holes for those Super Windy Days*
     Target Sockets are Free Draining in case it Rains
     Corrosion Resistant Zinc Dichromate Finish

    Using target stands at indoor ranges is problematic due in part to limited storage space, but also because they are hard to maneuver through doorways. The Port‑A‑Stand™ 'H' is easy to move when folded and takes less space to store.

    TIP: Use a Sling Strap for Easy Carry
    Carrying target stands, furring strips, targets and a staple gun down range can be cumbersome. You can make it much easier by using a Sling Strap as shown in the photo at right. The sling holds the Port-A-Stand™ and furring strips … freeing up your hands. (Click on image to view larger.)

    A Nylon strap 1″ to 1.5″ wide and about 7′ long is about right. Tie an eye in the ends and pass the strap through it to create an adjustable loop that will cinch down around the Port-A-Stands™ and furring strips. You can easily carry one to three Port-A-Stands™ with furring strips in one sling. if you don't have Nylon strapping, 1/2″ braided rope works, but is not as comfortable on your shoulder.

    * Targets, Furring Strips, Tent Stakes, Sling and Guy to carry your target stands are not included. 
    Port-A-Stand is a trademark of UniqueTek, Inc.
    Patent No.: US D752,173 S

    Width 18.4″
    Length 24″
    Height 4.2″
    Weight 8.2 lb
    Collapsed Dimensions 43.5″ x 3.75″ x 4.25″
    Staking Holes 3/8″ dia. x 4 places
    Material Hot Rolled Steel
    Finish Zinc Dichromate