• UniqueTek - Component Recovery Cup

    £20.00 £17.95

    There are only 2 items left in stock.

    When pulling bullets from loaded rounds, the Component Recovery Cup™ makes recovering and separating the powder, bullet and case an easy task. Simply pour the components directly from your bullet puller into the Component Recovery Cup™. A few shakes and the powder passes through the holes in the bottom of the cup.

    Fits on Top of Powder Measure Hopper
    The Component Recovery Cup™ fits into the top of your Powder Hopper, so the separated powder falls directly back into the powder measure for immediate reuse. It fits into any powder measure hopper with an internal diameter from 1.75″ to 2.5″ and has been tested on Dillon, Lee Auto-Drum, Lyman #55, RCBS Unflow, and Redding 3BR. But you can also use in on top of any convenient container suitable or capturing gunpowder (e.g. Water glass, canning jar, Tupperware container, etc.

    Separates Bullets as Small as .22cal.
    The nine drain holes in the bottom of the Component Recovery Cup™ are 0.18″ diameter, so it works with all bullets .22 caliber and larger. Yet the holes are large enough to provide rapid draining of long grained powders (e.g. H4350 and H4198) and large flake powders (e.g. Trail Boss).



    Specifications
    Material Stainless Steel
    Drain Holes 9
    Drain Hole Diameter 0.18″
    Top Diameter (Below Rolled Rim) ≈ 2.55″
    Bottom Diameter ≈ 1.55″
    Height ≈ 1.8″

    Weight


    Reviews