UNIQUETEK - Dillon Precision Enhancement parts - Powder Bar Spacer Bolt Kit T1751-S
£20.00
£17.85
The Powder Bar Spacer Bolts in this kit replace the white plastic Powder Bar Spacer Plugs (#13921) on Dillon Precision powder measures. By using this bolt instead of the original plastic plug, the Powder Bar Spacer is anchored solidly in place and can't creep back and forth as the powder bar cycles. Even a small movement of the Spacer can present a ledge that disturbs the smooth flow of powder to the powder bar.
Using a Shim on your Powder Bar Spacer?
If you have installed a shim on top of your Powder Bar Spacer to stop leakage with ultra-fine-grained powders, this kit will help keep the shim from working out of position by clamping it between the Powder Bar Spacer and Powder Measure Body.
Included in Kit †
– 4 Stainless Steel Powder Bar Spacer Bolts
– 4 Stainless Steel Shim Washers
– 1 #8-32 Hand Tap
– 1 3/32″ Hex Wrench
† Enough parts to modify 4 powder measures.
NEW Large Kit Includes ^
– 8 Stainless Steel Powder Bar Spacer Bolts
– 8 Stainless Steel Shim Washers
– 1 #8-32 Hand Tap
– 1 3/32″ Hex Wrench
^ Enough parts to modify 8 powder measures.
✓ Works with most versions of the Dillon Powder Measure,
✓ including (but not limited to) #20421, #22221 and #20782.
✓ For use with Small and Extra Small Powder Bars only.
✓ Works with Arredondo Powder Drop Slide.
✗ Not Needed with Large, Extra Large or Magnum Powder Bars.
✗ Cannot be used on Dillon Belted Magnum Powder System.
✗ Cannot be used on SL 900, RL 1000 or RL 450 Powder Measures
Using a Shim on your Powder Bar Spacer?
If you have installed a shim on top of your Powder Bar Spacer to stop leakage with ultra-fine-grained powders, this kit will help keep the shim from working out of position by clamping it between the Powder Bar Spacer and Powder Measure Body.
Included in Kit †
– 4 Stainless Steel Powder Bar Spacer Bolts
– 4 Stainless Steel Shim Washers
– 1 #8-32 Hand Tap
– 1 3/32″ Hex Wrench
† Enough parts to modify 4 powder measures.
NEW Large Kit Includes ^
– 8 Stainless Steel Powder Bar Spacer Bolts
– 8 Stainless Steel Shim Washers
– 1 #8-32 Hand Tap
– 1 3/32″ Hex Wrench
^ Enough parts to modify 8 powder measures.
✓ Works with most versions of the Dillon Powder Measure,
✓ including (but not limited to) #20421, #22221 and #20782.
✓ For use with Small and Extra Small Powder Bars only.
✓ Works with Arredondo Powder Drop Slide.
✗ Not Needed with Large, Extra Large or Magnum Powder Bars.
✗ Cannot be used on Dillon Belted Magnum Powder System.
✗ Cannot be used on SL 900, RL 1000 or RL 450 Powder Measures